Expand Your Factory Radio GM Satellite Radio Operation iSimple Connect iSimple® A Division of AAMP of America™ 13190 56th Court Clearwater, FL 33760 Ph. 866-788-4237 support@isimplesolutions.com ©2012 AAMP of Florida, Inc. www.isimplesolutions.
Table of Contents SXV100/200 Operation 1. Non-Navigation Radios 2. Navigation Radios Pages 2-4 4-6 SCC1 Operation 3. Non-Navigation Radios 4. Navigation Radios 7 7-8 5. Troubleshooting 6.
SXV100/200 Operation 1. Non-Navigation Radios Basic Features Entering Mode Select Menu Press the BAND button until “XM” is displayed on the screen. Immediately turn the TUNE KNOB in the top right corner to scroll through the available sources. Once “SIRIUS/XM” is displayed, press the FWD>> button to select the displayed mode.
Artist/Song/Game Tagging Tagging an Artist or Song To initiate tagging of an artist or song press and hold the <> button to choose favorite artist or favorite song. Press the <
Once in SAT+ mode use the TUNE KNOB to scroll through song, artist or game. Once the option you you wish to select is displayed, press the FWD>> button to choose. The first option in any category is “Del All”. If you select this “CONFIRM” will be displayed on the radio. Pressing the FWD>> button again will erase all tagged items in that category. Otherwise use the TUNE KNOB to scroll through the artists, songs or games. If you wish to delete one press the FWD>> button.
Store Presets Press and hold the preset button on which you want to store the channel. Please Note: If you are using the Connect to add Sirius/XM but still have factory XM installed, it is important to keep the presets in seperate banks. Recall Presets Press the preset button that corresponds with the channel you want to recall.
Alerts Once you have tagged favorite artists, songs or games you will be alerted whenever any of these selections are broadcast. When an alert happens the radio will beep and display alert text in a flashing manner. Press the scan down button to immediately tune to the alerted artist, song or game. PLEASE NOTE: You must be in Sirius/XM mode for the alert feature to function.
SCC1 Operation 4.Non-Navigation Radios Entering Mode Select Menu Press the “BAND” button a few times until XM is displayed on the screen. Immediately turn the rotary TUNE KNOB in the top right hand corner to scroll through available sources. Once “SIRIUS” is displayed, press the “FWD>>” button to select the displayed mode.
Category Selection Press the “Browse” icon then press the icon that corresponds with the Category you wish to select. Store Presets Press and hold the preset button on which you want to store the channel. Please Note: If you are using the Media Connect to add Sirius but still have factory XM installed, it is important to keep the presets in seperate banks. Recall Presets Press the preset button that corresponds with the channel you want to recall.
5. T roubleshooting Symptom Cause Remedy Radio shows “DEV INIT” Connect device is initializing This only occurs the first time the Connect is powered on. Wait a few minutes, cycle ignition off and on then enter SAT Mode. Connect does not recognize the satellite tuner as a source Satellite tuner was not plugged in during initialization.
6. Warranty One Year Limited Warranty The quality controls used in the manufacture of this product will ensure your satisfaction. This warranty applies only to the original purchaser of this product from an authorized iSimple® dealer. This warranty covers any supplied or manufactured parts of this product that, upon inspection by iSimple® authorized personnel, is found to have failed in normal use due to defects in material or workmanship. This warranty does not apply to installation expenses.
www.isimplesolutions.com For Best Performance Have It Professionally Installed.