Expand Your Factory Radio Port 1 Dip Switches USB GM Owner’s Manual iSimple Connect iSimple® A Division of AAMP of America™ 13190 56th Court Clearwater, FL 33760 Ph. 866-788-4237 support@isimplesolutions.com ©2012 AAMP of Florida, Inc. www.isimplesolutions.com 11-26-12 Rev.
Table of Contents 1. 2. 3. 4. 5. 6. 7. 8.
1. i Pod, iPhone or iPad Operation The iSimple Connect allows you to use either USB input or Bluetooth for iPod, iPhone or iPad operation (Bluetooth mode is only supported by iPod Touch, iPhone or iPad) Entering Mode Select Menu Press the BAND button a few times until “XM” is displayed on the screen. Immediately turn the rotary TUNE KNOB to scroll through available sources. Once “IPODUSB” or “IPODBT” is displayed, press PRESET 6 to select the displayed mode.
Browse Function Example: Browsing by Artist Press PRESET 3 to enter the browse menu. ”PL:LIST” will appear on your display. Turn the rotary TUNE KNOB until “AR:ARTIST” is displayed. Press PRESET 3 to select browse by Artist. The list of Artists on your Pod will be displayed one at a time in alphabetical order. “AR” will be displayed in front of the artist’s name to indicate that you are searching for an artist. Turn the rotary TUNE KNOB to cycle through the artists.
Rewind Press PRESET 1 to rewind the song that is playing. Press PRESET 1 again to resume play. Entering Browse Menu / Select Press PRESET 3 to enter the browse menu or to make a selection while in the browse menu. Menu UP Press PRESET 4 to move back one step in the browse menu. Exit Browse menu After 10 seconds on inactivity, the browse menu will exit automatically. Browse Function Example: Browsing by Folder Press PRESET 3 to enter the browse menu. ”FOLDER” will appear on your display.
5.Bluetooth Operation IMPORTANT NOTE: The radio MUST be in factory satellite radio or a Connect source (USB, iPod, AUX etc) in order for the Bluetooth handsfree to function. If you switch to AM, FM or CD mode the Bluetooth will automatically disconnect from your phone and you must use the handset. Pair Your Phone To use your phone with the Connect you must first pair it. Enter your phone’s Bluetooth menu and search for a new device. It should discover the device named “iSimple Connect”.
9. Menu - Allows you to adjust settings such as phone volume, streaming audio volume (A2DP), microphone volume, search for other Bluetooth devices, pair/ remove devices & reset the interface. See below for menu functions and operation. IMPORTANT NOTE In order to access the Voicedial, Call History, Call Last Number & Menu functions, the factory radio MUST be in Bluetooth mode. Menu Functions Accessing the Bluetooth Menu While in Bluetooth mode press PRESET 3 to enter the menu.
2. Track Forward/Back - Allows you to change tracks while streaming audio. Turn the TUNE KNOB or press the TUNE buttons to change tracks. 6. Updating the Interface Please visit www.iSimplesolutions.com/Connect for all updating instructions and up to date firmware files. 7. Troubleshooting Symptom Cause Remedy Radio shows “DEV INIT” Connect device is initializing This only occurs the first time the Connect is powered on or after it has been reset.
12. W arranty One Year Limited Warranty The quality controls used in the manufacture of this product will ensure your satisfaction. This warranty applies only to the original purchaser of this product from an authorized iSimple® dealer. This warranty covers any supplied or manufactured parts of this product that, upon inspection by iSimple® authorized personnel, is found to have failed in normal use due to defects in material or workmanship. This warranty does not apply to installation expenses.
www.isimplesolutions.com For Best Performanc e Have It Professionally Installe d.
