- Peripheral Automobile Accessories User Manual
6
8. Menu - Allows you to adjust settings such as phone volume, A2DP
volume, microphone volume, search for other Bluetooth devices, pair/
remove devices & reset the interface.
Menu Options
Please see your vehicle specic section for menu navigation
1. Settings - Allows you to perform a search for other Bluetooth enabled
devices, adjust the phone volume, adjust the microphone volume, adjust
the A2DP volume, adjust the ringer volume & reset the interface.
2. Devices - Allows you to see a list of paired devices as well as switch
between paired devices. The device which is active at the time will be
represented with an [A] next to the device name. If there is no active
device at the time there will not be an [A] present.
3. Remove - Allows you to delete paired devices
IMPORTANT NOTE
In order to access the Voicedial, Call History, Call Last # & Menu
functions, the factory radio MUST be in Bluetooth mode. Please see your
vehicle specic section for further details.
Streaming Audio Features
1. A2DP Streaming Audio - Allows you to stream audio wirelessly from
your iPhone. (iPhone MUST have rmware 3.0 or higher. First generation
iPhones do not support A2DP streaming audio)
2. Play/Pause - Allows you to play/pause A2DP audio with the touch of a
button.
2. Track Forward/Back - Allows you to change tracks while streaming
audio.
IMPORTANT NOTE
When using the ISBT21 in conjunction with an iPod cable on the
GateWay (uPAC), if the iPhone is playing but you do not hear any
sound, check that the output source listed at the bottom of the
iPhone matches the source on the radio. This problem only occurs
when you have the iPhone hooked to the GateWay (uPAC) dock
connector and connected to the ISBT21 simultaneously.