User Manual

Max input power: when PSU could not meet max operation power(1000w), to protect PSU and charger
working stability, user should adjust this value based on PSU. Eg:PSU with 12V/10A, this should be set to
120W.
Min input voltage: While using battery as input, this can help you avoid over discharge input battery. When
charger detects input voltage is less than Min input voltage, charger will stop any on-going task and warn
too low input voltage. Eg: 6S LiPo battery as input, set 21v as Min input to avoid over discharge battery.
Beeper sound: When setting to o, this will mute operation sound, but won't mute warning alarm.
26
System Default
Function
Language
Firmware Sharing
System Information
System self-checking
Volume
Completion Tone
Backlinght
Max.input power
Min.input voltage
BattGO
BattGO
Back
English
...
...
...
High
Repeat
High
1000W
12.0V
...
...
When using smart battery as input
Input connecting to BattGo
Output connecting to BattGo