User Manual

21
T series charger will charge battery in series, make sure output port is connected. For lithium battery, in
order to detect each cell's voltage and make sure battery is well balanced, we strongly suggest user to
connect balance port to do balance charging. When try to do unbalanced charging, before starting charger
will give you warning.
While Select storage function, if battery voltage is lower than storage voltage, charger will
perform charging task. If battery voltage is higher than storage voltage , charger will perform
discharging function. While in charging and discharging, to save task time, charger will not do
precise balancing.
When task nishes, there might be dierence between setting voltage and real voltage. This is
totally normal.
Storage function
Battery Type
Cells Voltage
Cell Count
Currnet
Task
Input Limit
Back
Battery type selection
End voltage slight adjustment, range ±0.05v
Battery cell selection，auto detection if balance port is connected
Current selection, charge / store (T6 Lite) 0.1-25.0A (T6 T8) 0.1- 30.0A, discharge 0.1- 5.0A
Select the task contents Charge / Discharge // Storage
Start task
back
Input/Output normal battery
Task Setting