Q8 Max User Manual

Rated voltage
Full charge voltage
Storage voltage
Discharge voltage
Preset voltage
Balance charge
Unbalanced charge
Supported cell count
Max. charging current
NiCd/MH Pb LiFe Lilon LiPo LiHv
3.60V
4.10V
3.70V
3.20V
2.90V
1~8S
30.0A
3.20V
3.65V
3.30V
2.90V
2.60V
1~8S
30.0A
3.70V
4.20V
3.80V
3.30V
3.00V
1~8S
30.0A
3.80V
4.35V
3.85V
3.40V
3.10V
1~7S
30.0A
1.20V
1.40V
1.10V
0.90V
1~16S
30.0A
2.00V
2.40V
1.90V
1.80V
1~12S
30.0A
Preset Battery Type of Charger and Task Parameters
Make sure to know the maximum charging current of the battery before charging, never
use excessive current to charge to damage your battery, which will result in overheat even
explosion during the charging process.
The charging and discharging capacity of battery is usually marked with C value.
Multiplying the charging C value and battery capacity equals to the maximum charging
current supported by the battery. For example, for a 1000 mAh battery with a charging
capacity of 5C, the maximum charging current would be 1000*5=5000mA; therefore,
the maximum charging current is 5A.
For a lithium battery, if it is impossible to confirm the supported charging C value, please
set the charging current below 1C, for the sake of its (lithium battery) safety.
How to Confirm Charging Current