User's Manual

Regulatory Informaon
Cau t ion
Always connect the Micro USB Cable to the power
adapter before inserng to the power outlet.
CE MARK
This device complies with the requirements of the EEC
direcve 2004/108/ EC with regard to “Electromagnec
compability” and 2006/95/EC “Low Voltage Direcve”.
FCC Statement
This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to
part 15 of the FCC Rules. These limits are designed to
provide reasonable protecon against harmful interfer-
ence in a residenal installaon. This equipment
generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance
with the instrucons, may cause harmful interference
to radio communicaons. However, there is no guaran-
tee that interference will not occur in a parcular
installaon. If this equipment does cause harmful
interference to radio or television recepon, which can
be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference
by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separaon between the equipment
and receiver.
Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV
technician for help.
FCC Radiaon Exposure Statement
This device complies with FCC radiaon exposure
limits set forth for an uncontrolled environment.
This device complies with Part 15 of the FCC Rules.
Operaon is subject to the following two condions:
This device may not cause harmful interference.
This device must accept any interference received,
including interference that may cause undesired
operaon.
Cauon!
Any changes or modificaons not expressly approved
by the party responsible for compliance could void
the user's authority to operate the equipment.
Safety Noce
Note: To comply with IEC60950-1 Clause 2.5 (limited
power sources, L.P.S) related legislaon, peripherals
shall be 4.7.3.2 “Materials for fire enclosure” compliant.
4.7.3.2 Materials for fire enclosures
For
MOVABLE EQUIPMENT having a total mass not
exceeding 18kg. The material of a FIRE ENCLOSURE, in
the thinnest significant wall thickness used, shall be of
V-1 CLASS MATERIAL or shall pass the test of Clause A.2.
For
MOVABLE EQUIPMENT having a total mass exceeding
18kg and for all
STATIONARY EQUIPMENT, the material of a
FIRE ENCLOSURE, in the thinnest significant wall thickness
used, shall be of 5VB CLASS MATERIAL or shall pass the
test of Clause A.1.
Legislaon and WEEE Symbol
2012/19/EU Wast Electrical and Electronic Equipment
Direcve on the treatment, collecon, recycling and
disposal of electric and electronic devices and their
components.
The crossed dust bin symbol on the device mean that
it should not be disposed of with other household
wastes at the end of its working life. Instead, the
device should be taken to the waste collecon
centers for acvaon of the treatment, collecon,
recycling and disposal procedure. To prevent possible
harm to the environment or human health from
uncontrolled waste disposal, please separate this
from other types of wastes and recycle it responsibly
to promote the sustainable reuse of material resources.
Household users should contact either the retailer
where they purchased this product, or their local
government of CE, for details of where and how they
can take this item for environmentally safe recycling.
Business users should contact their supplier and check
the terms and condions of the purchase contract.
This product should not be mixed with other
commercial wastes for disposal.
Safety Instrucons
Please adhere to the following safety guidelines to help
ensure your own personal safety and protect your
system from potenal damage.
Any acts taken that are inconsistent with ordinary use
of the product, including improper tesng, etc., and
those not expressly approved by iSAPPOS may result in
the loss of product warranty.
Unless expressly approved by an authorized representa-
ve of iSAPPOS in wring, you may not and may not
permit others to:
Disassemble or reverse engineer the device or
aempt to derive source code (underlying ideas,
algorithms, or structure) from the device or from
any other informaon provided by iSAPPOS,
except to the extent that this restricon is
expressly prohibited by local law.
Modify or alter the device.
Remove from the device any product idenfica-
on or other noces, including copyright noces
and patent markings, if any. To reduce the risk of
bodily injury, electrical shock, fire, and damage
to the device and other equipment, observe the
following precauons:
Power Sources
Observe and follow service markings.