Installation & Assembly
How to Apply Wall Decals
Step 1
Your wall decals will arrive
printed on one or more sheets and
packaged in a protecve plasc
shell. Open the packaging and
remove the sheets. Spread them out
on a flat surface near your desired
locaon of applicaon.
Step4
Examine the placement of your wall
decal. If the applied element needs
to be moved, simply peel it away
from the wall and re-apply. The
decal will remove and re-apply
easily regardless of how many mes
this process is repeated.
Step2
Peel the rst decal from the sheet. It
should remove easily from the liner.
If handling a large design, consider
recruing a second person to hold
the opposite end of your decal so
that the two sides do not sck
together.
Steps
Repeat steps 2-4 unl you have
applied all included wall decals, or (if
you are assembling a large design
from mulple pieces) completed the
applicaon of your giant wall decal.
Step3
Bring the decal to the wall. Slowly
smooth the design from top to
boom, pressing down rmly.
Ensure that the enre decal makes
contact with the wall or surface, and
that no air bubbles are trapped
beneath the scker.
Step6
If you need to move your decals,
simply peel them away from the wall
and place them back on their liners
(or wax paper). Roll up the sheets
and store them somewhere safe
unl they are needed again.