furniture company Assembly Instructions P.
Parts List 2 1 4 3 P.
r Hardware List A 1/4"*1/2" Small bolt 12 pcs B 1/4"*1/2" Small bolt 4 pcs C 1/4"*1" Large bolt 8 pcs D 016 Large washer 12 pcs E 024 Large washer 8 pcs F 1/4" Spring washer 8 pcs G M4 Small wrench 1 pc H Plastic link 21 pcs I Plastic tab lock 44 pcs The hardware quantities listed above are required for proper assembly. Some extra hardware may also have been included. P.
Step 1 1 Attach headboard rails (8,9) to legs (1,2) using small bolts (A). Tighten small bolts (A) with wrench (G). Step 2 4 3 Attach baseboard rail (10) to legs (3,4) using small bolts (A). Tighten small bolts (A) with wrench (G). P.
Step 3 ✓ / / / ,,,,,,,✓ ----------,�, ' ', \ \ \ \ 1 I •�; I -......_ \ \ \ \ \ \ , \ \ , \ \----- \ -- ,,, / / ,,,..,,,.,,,.,,,, / \ \� ''\ 1 Slide crossbars (5) into crossbars (6). Step 4 / I I I I I I � I I I I I I I /4-,��/� / _11p3 I 11 Attach support legs (11) to both sets of crossbars (5,6) using small bolts (B) and small washers (D). Tighten small bolts (B) with wrench (G). P.
Step 5 1 4 3 Attach the crossbar assemblies from the previous step to legs (1,2,3,4) using large bolts (C), spring washers (F), small washers (D) and large washers (E). Ensure that the slots along each crossbar assembly face inwards when attached to legs (1,2,3,4). Also, note the diagram above for proper placement of hardware. Tighten large bolts (C) with wrench (G). Step 6 Insert mattress support bars (7) into the slots of the crossbar assemblies.
Step 7 _,,------- .. H /.// ----------- \ ' , ,.,,:' ,,,, , ,,,,, _,/ ,,,,, ,, Snap plastic links (H) onto the middle of mattress support bars (7) along the length of the bed. Step 8 Final Assembly P.
