Assembly Instruction

ManualsBrandsIsabelle & Max ManualsBedsEire Solid Wood Platform Bed

READY

ASSEMBLY INSTRUCTIONS

Before assembling your trundle bed, please read through these

instructions carefully. Familiarize yourself with the different parts.

Page 1 of 4

HARDWARE

A D

JCB M6 X 2 3/8 ”( 60mm ) - 4 pcs

Spare - 1 pc

JCB M6 X 1 3/4”( 45mm ) - 17 pcs

Spare - 2 pcs

JCB M6 X 5/8”( 15mm ) - 6 pcs

Spare - 2 pcs

For JCB M6 X 2”(50mm )

Fix L Bracket to Front Panel

Barrel Nut - 4 pcs

Spare - 1 pc

L Bracket - 3 pcs

Allen wrench - 1 pc

Spare - 1 pc

Allen wrench

Adult Assembly

NOTE: WE INCLUDE SPARE HARDWARE IN CASE THE ALLEN WRENCH, JCB OR BARREL NUT ARE DAMAGED DURING ASSEMBLY.

TRUNDLE BED

BED WITH TRUNDLE BED

TRUNDLE BED

Summary of content (4 pages)

PAGE 1
READY TRUNDLE BED ASSEMBLY INSTRUCTIONS Before assembling your trundle bed, please read through these instructions carefully. Familiarize yourself with the different parts. Allen wrench Adult Assembly BED WITH TRUNDLE BED HARDWARE NOTE: WE INCLUDE SPARE HARDWARE IN CASE THE ALLEN WRENCH, JCB OR BARREL NUT ARE DAMAGED DURING ASSEMBLY.
PAGE 2
PARTS LIST 01 HARDWARE 1 BOX 05 SIDE CROSS RAIL 2 PCS 02 FRONT PANEL 1 PC 06 CENTER CROSS RAIL 1 PC 03 FRONT RAIL 1 PC 07 BACK BOARD 2 PCS 04 BACK RAIL 1 PC 08 SLAT 2 SET 07 05 04 07 08 06 08 05 02 01 03 B STEP 1 B 05 B B E Adult Assembly B 04 06 JCB M6 X 1 3/4” E B E L Bracket 03 F B E 05 Allen wrench Attach the side cross rail (05) center cross rail (06) to the front and back rail (03)(04), using L bracket (E), JCB M6 X 1 3/4”(B).
PAGE 3
STEP 2 C 02 Adult Assembly C C C JCB M6 X 5/8” F Allen wrench Attach the front panel (02) to the rail assemblies as shown, using JCB M6 X 5/8” (C). Tighten with the Allen wrench (F). STEP 3 B B B 08 Adult Assembly B B B B 08 B JCB M6 X 1 3/4” F B Allen wrench Lay the slat kit (08) onto the rail assemblies as shown, using JCB M6 X 1 3/4” (B). Tighten with the Allen wrench (F).
PAGE 4
STEP 4 Adult Assembly A 07 JCB M6 X 2 3/8” A D D 07 Barrel Nut A F D Allen wrench Attach the back boards (07) to the rail assemblies as shown. Using JCB M6 X 2 3/8”(A) barrel nut (D), tighten with the Allen wrench (F) Congratulations ! Your Trundle Bed is now ready for use. We recommend that you periodically check that all screws are tight and all parts are secure to ensure lasting safety.