Installation & Assembly

ManualsBrandsIsabelle & Max ManualsBeds & HeadboardsEire Headboard

Page 1 of 5

BOOKCASE HEADBOARD

METAL L-BRACKET - 3 pcs

WOOD SCREW 1/2” - 6 pcs

WOOD SCREW 1 1/2” - 4 pcs

HEADBOARD HARDWARE

JCB M6 X 1 1/2”(35mm) - 6 pcs

JCB M6 X 1 2/8”(30mm) - pcs4

JCB M6 X 1”( 5mm) - 6 pcs2

Spare - 1 pc

Spare - pc1

JCB M6 X 2”(50mm) - 4 pcs

Spare - 1 pc

NOTE: WE INCLUDE SPARE HARDWARE IN CASE THE ALLEN WRENCH, JCB, WOODEN DOWEL,

OR WOOD SCREW ARE DAMAGED DURING ASSEMBLY.WASHER

WOODEN DOWEL 10 X 30mm - 4 pcs

WOODEN 2PULL SCREW - pcs

SPLIT WASHER - 4 pcs

FLAT WASHER - 4 pcs

WOODEN DOWEL 8 X 30mm - 12 pcs

Spare - 1 pc

ALLEN WRENCH - 1 pc

Spare - 1 pc

WOODEN 2PULL - pcs

ASSEMBLY INSTRUCTIONS

( TWIN, FULL )

Before assembling your bookcase Headboard, please

read through these instructions carefully and familiarize yourself with the different parts.

Please note that you will require a Phillips Head Screwdriver and an Allen wrench.

Adult Assembly

Phillips Head

Screwdriver

Customer Supplied

BOOKCASE HEADBOARD

NEWPORT BOOKCASE BED WITH BED DRAWER

NEWPORT BOOKCASE BED WITH TRUNDLE BED

NEWPORT BOOKCASE WITHHEADBOARD METAL FRAME

READY

ASSEMBLE

Summary of content (5 pages)

PAGE 1
BOOKCASE HEADBOARD ASSEMBLY INSTRUCTIONS Phillips Head Screwdriver READY ( TWIN, FULL ) TO Before assembling your bookcase Headboard, please read through these instructions carefully and familiarize yourself with the different parts. ASSEMBLE Please note that you will require a Phillips Head Screwdriver and an Allen wrench.
PAGE 2
HEADBOARD PARTS LIST 03 01 HARDWARE 1 BOX 02 TOP STORAGE 1 SET 03 LEFT SIDE PANEL 1 PC 04 RIGHT SIDE PANEL 1 PC 05 LOWER SHELF 1 PC 06 PILLOW STOP 1 PC 07 BACK PANEL 1 PC 08 LEFT POST 1 PC 09 RIGHT POST 1 PC 10 SPACER BLOCK 2 PCS 02 05 04 07 06 08 10 01 09 10 STEP 1 Insert wooden dowel to locator holes will receive (D)(E) as shown below.
PAGE 3
STEP 2 Attach the left, right post (08) and (09) to the left, right side panel (03) and (04) as shown below. Using JCB (C) and (K). Tighten with allen wrench (N). 03 Adult Assembly C C 04 08 C K JCB M6 X 2” K 09 K C JCB M6 X 1” C N ALLEN WRENCH STEP 3 Attach the lower shelf (05), pillow stop (06) & back panel (07) to side panels (03) and (04) as shown below. Using JCB (B), tighten with Allen wrench (N). Attach the spacer block (10) to side panels (03) and (04) as shown below.
PAGE 4
STEP 4 Lay the top storage (02) on the floor upside down, taking care to lay it on some cardboard to prevent scratching. Stand the side panel assembly upside down and using JCB (A), tighten with Allen wrench (N). A A Adult Assembly A A JCB M6 X 1 2/8” N 02 ALLEN WRENCH UPSIDE DOWN STEP 5 Adult Assembly Install metal L- Bracket (F) as shown below. Using wood screw (G), tighten with Phillips head screwdriver. ( Customer supplied ) F STEP 6 Install wooden pull (I) to each of the doors as shown.
PAGE 5
STEP 7 Attach headboard assemby to the bed frame as shown below. (Purchased separately) Using bed hook or Install the Headboard to the metal frame (Purchased separately). Using JCB (K) split and flat washer (L) and (M) tighten with allen wrench (N). Adult Assembly K JCB M6 X 1” For Slat kit assembly, follow assembly instructions included with slat kit. L SPLIT WASHER M L M FLAT WASHER N K ALLEN WRENCH Congratulations! Your Bookcase Bed is now ready for use.