ASSEMBLY INSTRUCTIONS
ASSEMBLY INSTRUCTIONS ASSEMBLY TIPS 1. Remove hardware from box and sort by size. 2. Please check to see that all hardware and parts are present prior to start of assembly. 3. Please follow attached instructions in the same sequence as numbered to assure fast & easy assembly WARNING!: 1. Don't attemp to repair or modify parts that are broken or defective. Please contact the store immediately. 2. This product is for home use only and not intended for commercial establishments.
ASSEMBLY INSTRUCTIONS ASSEMBLY TIPS 1. Remove hardware from box and sort by size. 2. Please check to see that all hardware and parts are present prior to start of assembly. 3. Please follow attached instructions in the same sequence as numbered to assure fast & easy assembly WARNING!: 1. Don't attemp to repair or modify parts that are broken or defective. Please contact the store immediately. 2. This product is for home use only and not intended for commercial establishments.
ASSEMBLY INSTRUCTIONS ASSEMBLy TIPS : 1. Remove hardware from box and sort by size. 2. Please check to see that all hardware and parts are present prior to start of assembly. 3. Please follow attached instructions in the same sequence as numbered to assure fast & easy assembly WARNING!: 1. Don't attemp to repair or modify parts that are broken or defective. Please contact the store immediately. 2. This product is for home use only and not intended for commercial establishments.
ASSEMBLY INSTRUCTIONS LOWER BED END STEP 1 STEP2 I I I I I I I I I I _J PAGE 5 OF 11
ASSEMBLY INSTRUCTIONS STEP3 STEP4 UPPER BED END STEPS PAGE 6 OF 11
ASSEMBLY INSTRUCTIONS STEP6 \\ 1' I \ I \ I \ I \ I \ I \ I \ \.
ASSEMBLY INSTRUCTIONS STEPS STEP9 __ I 7 L---- .... ,,"I .... .... .... (/ I I I I ...J STEP10 .... .... I <.. ,..
ASSEMBLY INSTRUCTIONS STEP11 FROM INSIDE VIEW STEP12 COMPLETE PAGE 9 OF 11
ASSEMBLY INSTRUCTIONS SIZE OF MATTRESS The length and width of the bunk mattress are as follow: Upper bunk Lower bunk Length 74 n - 75 n 74 n - 75 n Width n 37 1/2 - 38 1/2" 37 1/2 n - 38 1/2" Thickness 6" Maximum 6" Maximum Ensure thickness of mattress does not exceed 6" and there must be at least 5" from mattress sleeping surface to top edge of guardrail. 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14.
ASSEMBLY INSTRUCTIONS 1. When using beds as bunk beds, the ladder MUST be securely attached to the upper bunk rail at all times. 2. When using the beds as two (2) separate floor-standing beds, the ladder MUST be stored in a separate location where children cannot use the ladder in any manner. 3.
63.93" INNER SIZE: 38.70" x 75.
