Owner Manual

16
Safety Tips for Assembling and Re-assembling Cribs
• Parents should not use any crib with missing, broken or loose hardware parts. Crib slats or spindles should be spaced
no more than 2-3/8” apart, and none should be loose or missing. NEVER use a crib with corner posts over 1/16” of an
inch above the end panels (unless they are over 16” high for a canopy).
• Check this product for damaged hardware, loose joints, loosen bolts or other fasteners, missing parts, or sharp edges
before and after assembly and frequently during use. Securely tighten loose bolts and other fasteners. DO NOT use
crib if any parts are missing, damaged or broken. Contact us for replacement parts and instructional literature if
needed. DO NOT substitute parts.
• Never place infants to sleep on pillows, sofa cushions, adult beds, waterbeds, beanbags, or any other surface not
specifically designed for infant sleep.
• Always check all sides and corners of the crib to assure proper assembly with no openings that may entrap a child.
The crib mattress should fit snugly with no more than two fingers width, one-inch, between the edge of the mattress
and the crib side. Otherwise, the baby can get trapped between the mattress and the side of the crib.
• Do not try to repair any side of the crib without manufacturer-approved hardware.
• Putting a broken side up against the wall is not a solution and can often make the situation worse.
• When re-assembling the crib for your second child, please keep in mind that the screw holes will need to be filled in
order for the screws to grip to the wood. Talk to your local hardware store or lumberyard about how to do it properly.
One year limited warranty
We want you to be satisfied with any product that bears our name or logo. We will provide promptly, at the request of the
retailer, and without charge, any missing parts that have been reported, with proper description, within 7 days of the
purchase of the products. Our warranty guarantees optimal workmanship and lack of significant defects. The product
warranty lasts a year from the date of your purchase. Please keep the original receipt so that we may process your one
year limited warranty request. This warranty only covers new units with original packaging. Ownership of the warranty is
non-transferable. The warranty does not cover any used, second-hand, or demo models. Our obligation under this warranty
is to replace or repair the merchandise, at our option, free of charge. This warranty does not cover any damaged or
defective parts that result from normal wear and tear, abuse, negligence, improper use or alteration to the finish design, and
hardware. Specific rights issued by this warranty may vary from state to state. Some states do not allow limitations on how
long implied warranties last. DO NOT return products to the store once a product is used, it cannot be resold and the
materials and energy invested in the product would go to waste. In the event that we determine that a defect that may result
from customer abuse or misuse, we will contact you with information about services and methods to prevent occurrences.
We strongly recommend you register your product with our company by filling out registration and mailing it back to us. This
ensures you are up-to-date with our products’ maintenance and information.
This warranty does not cover damage caused by accident, misuse or any use other than as intended and described in this
assembly sheet or damage resulting from failure to maintain and clean this product as specified in this assembly sheet. This
warranty applies only to the original purchaser of the product.
Care and Maintenance
• Storage: The crib must be kept in a dry and clean area. Solid wood tends to exchange moisture with the surrounding
air and reacts to major changes in temperature and humidity. It is best to place your furniture away from heating or air-
conditioning vents. Direct exposure to sunlight can discolor of the wood, so do not place your product where it will
receive prolonged sunlight exposure.
• Care and Cleaning: Do not scratch or chip the finish. Do not use abrasive chemicals for cleaning. Clean with mild
soap on a soft rag. Rinse and dry thoroughly. If you choose to refinish this furniture, be sure to use only a non-toxic
finish specified for children’s products.
• Wood is a natural material. As such, it can be affected by changes in temperature and humidity. Extreme changes in
humidity and temperature can cause the wood to warp, swell, crack, or shrink, thus compromising the structural
integrity of the crib and making it dangerous to use.
CAUTION! Safety Tips for Use of Cribs
Many older cribs, including secondhand or second use cribs, may not meet all current safety
standards. For baby’s safety, even if you are on a tight budget, you should not purchase a used
crib at a garage sale or accept a hand-me-down that does not meet the most recent Federal and
ASTM standards.
Thank you for choosing our product.