Owner Manual

10
Crib Assembly Sheet
STEP 2:
Attach Mattress Support (F) by swinging out the four hangers at the corners of the mattress support
and use 4 Bolts (#2) to attach hangers to the brackets on the Headboard (A) and Footboard (B) at an
even level on all sides. Attach all parts Tighten all screws firmly with Wrench (#3)..
Make sure that these bolts are tightly secured on even level.
Check components periodically, make sure mattress support’s hinges are been
tightened properly and securely.
Warning
Envelope
Face Up