Owner Manual

ManualsBrandsIsabelle & Max ManualsBaby & KidsFeldt 3-in-1 Convertible Crib with Storage

in-1 Convertible Baby Crib

THIS PRODUCT IS NOT INTENDED FOR INSTITUTIONAL OR COMMERCIAL USE.

If you have any questions or missing parts, contact us. DO NOT return product parts

to the store from where it was purchased before contacting our Customer Service.

Summary of content (16 pages)

PAGE 1
3-in-1 Convertible Baby Crib THIS PRODUCT IS NOT INTENDED FOR INSTITUTIONAL OR COMMERCIAL USE. If you have any questions or missing parts, contact us. DO NOT return product parts to the store from where it was purchased before contacting our Customer Service.
PAGE 2
     • • • • • • •       
PAGE 3
• • •        
PAGE 4
Parts Identification Sheet DO NOT assemble crib if parts are defective or missing. Contact us for exchange or keep the original box for return authorization. ~ Crib Assembly Parts A. Headboard (1 pc) B. Footboard (1 pc) C. Back Stationary Side Panel (1 pc) D. Front Stationary Side Panel (1 pc) E. Stabilizer Bar (2 pc) F. Mattress Support (1 pc) G. Drawer Front Panel (1 pc) H. Drawer Left Side Panel (1 pc) I. Drawer Right Side Panel (1 pc) J. Drawer Back Panel (1 pc) K. Drawer Divider (1 pc) L.
PAGE 5
Hardware Identification Sheet DO NOT assemble crib if parts are defective or missing. Contact us for exchange or keep the original box for return authorization. ~ Crib Assembly Hardware Item # Fittings Qty 1. Bolt M6 * 60mm (12 pcs) 2. Bolt M6 * 17mm (4 pcs) 3. Wrench (1 pc) 4. Barrel Nut (12 pcs) 5. Screw (12pcs) 6. Bolt M6 * 50mm (2 pcs) 7. Wood Dowel 8 * 30mm (8 pcs) 8.
PAGE 6
A. Headboard (1 pc) G. Drawer Front Panel (1 pc) B. Footboard (1 pc) H. Drawer Left Side Panel (1 pc) C. Back Stationary Side Panel (1 pc) I. Drawer Right Side Panel (1 pc) D. Front Stationary Side Panel (1 pc) J. Drawer Back Panel (1 pc) E. Stabilizer Bar (2 pc) K. Drawer Divider (1 pc) F Mattress Support (1 pc) L.
PAGE 7
STEP 1: Attach Drawer Left Side Panel (H), Drawer Right Side Panel (I) and Drawer Divider (K) to Drawer Back Panel (J) by using 6 Screws (#5). Tighten firmly with Phillips screwdriver. STEP 2: Slide Drawer Bottom Panels (L) into the grooves.
PAGE 8
STEP 3: Attach Drawer Front Panel (G) to Drawer Left Side Panel (H), Drawer Right Side Panel (I) and Drawer Divider (K) by using 6 Screws (#5). Tighten firmly with Phillips screwdriver.
PAGE 9
STEP 1: Insert 2 wood dowels (#7) on Back Stationary Side Panel(C), attach Headboard (A) and Footboard (B) to Back Stationary Side Panel (C) by inserting 4 Barrel Nuts (#4) of the corners of the Back Stationary Side Panel (C) and install 4 Bolts (#1), Attach all parts and do not tighten all Bolts yet.
PAGE 10
Crib Assembly Sheet STEP 2: Attach Mattress Support (F) by swinging out the four hangers at the corners of the mattress support and use 4 Bolts (#2) to attach hangers to the brackets on the Headboard (A) and Footboard (B) at an even level on all sides. Attach all parts Tighten all screws firmly with Wrench (#3).. Face Up Warning Envelope Make sure that these bolts are tightly secured on even level.
PAGE 11
Crib Assembly Sheet STEP 3: Attach Stabilizer Bar (E) to Headboard (A) and Footboard (B) by inserting 2 wood dowel (#7) and 2 Barrel Nuts (#4) into Stabilizer Bar before securing 2 Bolts (#1). Tighten all screws firmly with Wrench (#3).
PAGE 12
STEP 4: Insert 2 wood dowels (#7) to top rail of Front Stationary Side panel (D), Attach Front Stationary Side Panel (D) to Headboard (A) and Footboard (B) by inserting 4 Barrel Nuts (#4) from underside of each corner of the Front Stationary Side Panel before securing 4 Bolts (#1), Tighten all screws firmly with Wrench (#3).
PAGE 13
STEP 5: a. Evenly slide the drawer along the rails beneath the crib. b. Complete.
PAGE 14
Day Bed Assembly Sheet *Mattress Support Assembly must be in the lowest position before installing guardrail. a. Loosen the Front Stationary Side Panel (D) bolts and detach the Front Stationary Side Panel (D) from crib assembly. b.
PAGE 15
Toddler Bed Assembly Sheet *Mattress Support Assembly must be in the lowest position before installing guardrail. Attach Guardrail (M) to Stabilizer Bar by using 2 bolts (#6) and left front leg by using 2 bolts (#8), Tighten all screws firmly with Wrench (#3). a. Complete.
PAGE 16
• • • • • • • Safety Tips for Assembling and Re-assembling Cribs Parents should not use any crib with missing, broken or loose hardware parts. Crib slats or spindles should be spaced no more than 2-3/8” apart, and none should be loose or missing. NEVER use a crib with corner posts over 1/16” of an inch above the end panels (unless they are over 16” high for a canopy).