Datasheet

www.irwin.eu
18
Clamps for Woodworking
T-Bar Clamps 136 Series
These clamps resist twisting and distortion under clamping pressures which can be as high as 1.9 tons. Both the head and
slide are guaranteed unbreakable.
Item No. Description EAN Master
Pack
Shelf
Pack
T136/5 T-Bar Clamp, 1070mm 0734442034087 - 1
T136/6 T-Bar Clamp, 1200mm 0734442034209 - 1
T136/7 T-Bar Clamp, 1350mm 0734442034322 - 1
T136/9 T-Bar Clamp, 1680mm 0734442034445 - 1
T136/11 T-Bar Clamp, 1980mm 0734442034568 - 1
Sash Clamps 135 Series
These are heavy duty clamps with a bar section of 32mm x 6mm (1-1/4” x 1/4”).The slide and head are guaranteed
unbreakable & the slide is secured by a solid steel pin passing through one of the locating holes spaced along the steel bar.
The steel mainscrew applies pressure quickly and smoothly through a fast acting, hard wearing rolled thread.
Slides and heads are fl at bottomed so that the clamp will stand without support.
Item No. Description EAN Master
Pack
Shelf
Pack
T135/4 Sash Clamp, 915mm 734442033608 - 1
T135/5 Sash Clamp, 1070mm 734442033721 - 1
T135/6 Sash Clamp, 1220mm 734442033844 - 1
T135/9 Sash Clamp, 1680mm 734442033875 - 1
Clamp Head
Low cost alternative to full size bar clamps. The grey cast grey iron head and slide with steel mainscrew can be fi tted to a
wooden batten 1”/25mm thick by 1-1/2”/38mm wide and any length.
Item No. Description EAN Master
Pack
Shelf
Pack
TM130 Clamp Head, 25 x 38mm 734442348085 - 6