User Guide

1 - Program Switch

• Three-position slide switch used to select Program A, B or C

for setup, program review and manual operation.

2 - LCD Display

• High-contrast LCD panel displays all controller programming

and operating information.

3 - Plus and Minus Buttons

• Push buttons used to increase and decrease display values

during controller setup, programming and manual operations.

Adjusts values incrementally (press and release) or by rapid

scrolling (press and hold).

4 - Dial

• A 25-position rotary switch used to select stations, start times,

watering days and special functions for setup, programming

and manual operations.

5 - Manual Button

• Push button used to start and control manual operations

by station. Also serves as an advance button for setup,

programming and manual operations.

6 - Function Switch

• A three-position slide switch used to select one of three con-

troller function modes:

Off or Stop - Stops all current watering operations, prevents

all automatic and manual operations and used in setting Rain

Delay feature.

Set Programs - Enables watering program setup values to be

selected and changed.

Run or Manual - Normal switch position for all automatic and

manual watering operations.

7 - Semi-Auto Start Button

• Push button used to manually start Program A, B or C

watering cycle (as selected) or the Station Test Run feature.

Overview: Control Module Interface

66767_RainDial 0428A 3/28/07 2:24 PM Page 6