User Guide

similar, but are not interchangeable.

Outdoor Models:

• Input: 120 VAC 60 Hz, 30 VA (Domestic), 230 VAC, 50 Hz,

30VA (International) 240 VAC, 50 Hz, 30VA (Australia)

Indoor Models:

• Input: 24 VAC, 60 Hz, 30 VA (domestic) or 24 VAC, 50 Hz,

30 VA (International and Australian)

All Models:

• Station Output: 24 VAC at 0.5A, 1.0A (maximum total)

• Master Valve/Pump Start Relay Output: 24 VAC at 0.375A

• 2.0A Slow-blow Fuse

• Battery Back-up (time, day and date)

• Operating temperature range: 32˚F to 140˚F (0˚C to 60˚C)

Caution: The Rain Dial is designed to operate 24 VAC valve

solenoids rated at 0.25A (6 VA). Current total load must not

exceed 1.0A maximum. A maximum of two solenoids per station

terminal may be used, but not to exceed 0.5A per station. No

more than three solenoids (plus MV/Pump circuit) should be on

at any one time .

To prevent controller damage, do not link the valve common wire

of two or more controllers. Use a separate valve common wire for

each controller.

O Specifications

66767_RainDial 0428A 3/28/07 2:25 PM Page 36