User Guide

Semi-Automatic operation enables a selected Program watering

cycle to be started manually. Once running, the manual advance

feature enables you to step through the programmed station

sequence.

1. Place the Function switch in the Run position.

2. Turn the Dial to the Current Time position.

3. Place the Program switch to select A, B or C.

4. Press the Semi-Auto button to start the watering cycle.

Note: Once started, the station sequence can be manually

advanced by pressing the Manual button.

Note: The Manual Advance feature applies to all Automatic,

Semi-Automatic and Station Test watering operations for the

selected Program.

Note: To terminate watering operations, place the Function

switch momentarily in the OFF position.

Semi-Automatic Operation

O Manual Operations

66767_RainDial 0428A 3/28/07 2:25 PM Page 30