User Guide

The Stack/Overlap Control feature provides the option to restrict
operation to one Program or station at a time (stacked) or to enable
three Programs or three stations to operate concurrently (overlap).
Note: The Stack option prevents another Program or station from
starting until the one in operation is finished. If a Program’s start time
is delayed past midnight it will not run.
IMPORTANT: Selecting the Overlap option can cause the
electrical and/or hydraulic capacity of your irrigation system
to be exceeded. Plan your watering operations carefully!
1. Place the Function switch in the Set Programs position.
2. Turn the Dial to the Skip Days/ Special Functions position.
3. Press the Manual button 6 times (from the initial Skip Days
screen) to display 3:On (three programs/stations overlap).
4. Press the or button to toggle between 3:On and 1:On
(stack - one program/station at a time).
5. Turn the Dial to the Current Time position.
6.
Place the Function switch in the Run position.
Stack/Overlap Control Feature
25
66767_RainDial 0428A 3/28/07 2:25 PM Page 25