User Guide

The Rain Delay enables the Rain Dial to suspend all automatic
watering activity from 1 to 9 days.
1. Place the Function switch in the OFF position.
2. Press the button to set 1 to 9 delay days (OF 1 – OF 9).
3. Place the Function switch in the Run position.
The display will begin alternating between the current time and
the number of delay days remaining. The delay day number will
decrease each day until watering automatically resumes at the
end of the selected delay period.
Note: To disable Rain Delay at any time; returning the controller to
active mode, repeat steps 1 and 2 to decrease the Rain Delay day
to one increment below OF 1 (current time will be displayed).
The Water Budget feature enables the run time of all stations
assigned to a Program to simultaneously adjusted up or down by
percentage from 0 (OFF)–200% in 10% increments.
1. Place the Function switch in the Set Programs position.
2. Place the Program switch to select A, B or C.
3. Turn the Dial to the Skip Days/ Special Functions position.
4. Press the Manual button two times (from the initial Skip Day
screen) to display 100.
5. Use the and buttons to set the desired percentage.
Note: To turn the Program Off, press the button to display
OFF (one increment below 10).
6. Turn the Dial to the Current Time position.
7. Place the Function switch in the Run position.
Water Budget Feature
Rain Delay Feature
O Special Functions and Features
24
66767_RainDial 0428A 3/28/07 2:25 PM Page 24