User Guide

1. Place the Mode Switch in the Set Programs (center) position.
2. Turn the Dial to the Current Time position.
3. Use the and buttons to set the current time (note the cor-
rect AM/PM designation).
Hold the button down to scroll.
4. Turn the Dial to the Today position.
5. Use the and buttons to set the current day (abbreviation).
6. Turn the Dial to the Current Time position when finished.
Each station can have a different run time assignment in each pro-
gram (A, B and C). The run time can be set from 1 to 59 minutes in
one-minute increments or from 1 to 5.9 hours in
1
⁄10-hour increments.
1. Place the Function switch in the Set Programs (center) position.
2. Place the Program switch to select A, B or C.
3. Turn the Dial to the Valve Run Time number to be set.
4. Use the and buttons to set the run time.
Hold the button
down to scroll. The display will continuously scroll from minutes
to hours.
5. Repeat steps 2 and 3 for the remaining valves you wish to set
6. Turn the Dial to the Current Time position when finished.
Each Program can have up to three separate watering cycle start
times. Generally one start time is sufficient for most applications.
Multiple start times and short run times work well for growing-in a
new lawn or establishing fresh sod.
Setting the Program Cycle Start Time(s)
Setting the Valve Run Time
Setting the Current Time and Day
O Basic Programming Procedures
20
66767_RainDial 0428A 3/28/07 2:25 PM Page 20