User Guide

Pump circuit On/Off during well recovery -
Indicates if pump circuit will be On or Off during a
well recovery period.
Program Stacking/Overlap - If program stacking is
selected, 1:on will be displayed. If program overlap
is selected, 3:on will be displayed.
Information Displayed During Operation
With the Function Switch in the RUN position and
the dial set to Current Time, the currently operating
valve number will be displayed.
Automatic Mode with No Program ON - With the
Function Switch in the RUN position, the current
time with a flashing colon (:) is displayed. If the colon
is not flashing, the controller is using battery power.
Automatic or Semi-Auto Mode With Program ON -
Displays the current time. Turn the dial to an active
valve and the display will show the valve number,
the program (A, B or C) and the time remaining for
that valve to run.
Manual Mode - With the Dial pointing to the appro-
priate valve number, the display shows the valve’s
number, an M (for manual), and the time remaining
for the valve to run.
Diagnostic Circuit Breaker - The message FUS
and the effected station number will be displayed
alternating with the current time of day.
Rain Delay - When the Rain Delay feature is in use,
the display will alternate between the current time of
day and the number of days remaining until automatic
watering resumes. This example indicates 9 delay
days remaining.
19
66767_RainDial 0428A 3/28/07 2:25 PM Page 19