User Guide

Information Displayed When Programming

The Display will show the following information with the Function

switch in the Set Programs position, in conjunction with the following

Dial settings:

Valve Run Time - Shows run time in minutes or

hours. Also displays OFF for unused valves.

Start Times - Displays Program time or OFF for

unused start times.

Skip Days - Shows days numbered 1–31, or OFF

and Once Every will be displayed.

Schedule - Displays ON or OFF. If Skip Days has

been set, three dashes (- - - ) Skip Mode will be

displayed.

Odd/Even Date - Shows Odd or Evn (Even) water-

ing day schedule if selected (or OFF if excluded).

Today - Displays seven individual days for a weekly

schedule, or displays the day in the Skip Day interval

1–31 for a Skip Days schedule.

Pump Circuit On/Off during station operation-

Indicates if the pump circuit will be On or Off when

the station runs.

• Special Functions Dial Setting:

Test Run Cycle - All station numbers with an

assigned run time will be shown. T:1–10 minutes will

indicate the station run time selected for test cycle.

Water Budget - Shows current Water Budget

setting of 0 –100 (%) or OFF.

Clear Program Memory - Indicates clear memory

function is selected.

Well Recovery Delay - Shows amount of delay time

set between stations: 1 second to 2 hours (or OFF).

What the Display Indicates

66767_RainDial 0428A 3/28/07 2:24 PM Page 18