User manual

Setting up the Daily Rainfall Alert

1. In Rain Mode, press ALARM to display rainfall alert.

2. Press and hold ALARMuntilrainfallalertand“ALARMHI”startsashinginthedisplay.

3. Set Value for Rainfall Alert:

Press UP or DOWN to adjust value. Press and hold either button for fast advance.

Press ALARMtoconrmyourselection.

4. Upon completion the display will be returned to the rainfall alert display.

Disabling when Daily Rainfall Alert is Activated

To Disable Rainfall Alert:

Press ALARM to disable the alert.

Wind Mode

The wind direction is shown by an animated compass display. Its angle can be displayed

as compass points (i.e. NW) or in bearings from the north (i.e. 22.5º).

The upper left of the wind display can be set to indicate the temperature at the

anemometer or the temperature adjusted with a wind chill factor.

The lower left of the wind display indicates the average wind speed for the last 10 minutes,

as well as gust, wind speed alert and gust alert information. It can also show records of the

maximum values of wind speed and gust attained for the current day.

The wind speed and gust alert functions can be programmed to sound if the wind speed or

gustexceedsapre-conguredlimit.Thewindspeedmaybedisplayedinkm/h,mph,m/s

or knots.

Note: The wind speed alert has a 5 mph hysteresis and the wind gust speed alert has a

7 mph hysteresis. The hysteresis is to prevent the alerts from sounding constantly due to

smalluctuationsnearthealertvalue.Thismeansthatafterthewindspeedreachesthe

alert value, it will have to fall below the alert value plus the hysteresis to deactivate the

alert.

Accessing Wind Mode

From the main console unit: Press UP or DOWN until the WIND icon on the display

startsashing.

From the remote control: Press .

Conguring Wind Display

In Wind Mode, each press of SET rotates display between:

- Temperature with wind chill, wind direction in bearings

- Temperature with wind chill, wind direction in compass points

- Temperature at anemometer, wind direction in compass points

- Temperature at anemometer, wind direction in bearings

Setting Units for Wind Speed Display (km/h , mph, m/s or knots)

In Wind Mode, press and hold SET to convert wind speed units between km/h, mph, m/s or

knots.