User manual

23
Rotating Between Temperature and Dew Point Display
In Temperature and Humidity Mode, each press of SET rotates temperature display between:
- Temperature and Relative Humidity
- Dew Point Temperature and Relative Humidity.
Setting Units for Temperature Display (ºC or ºF)
In Temperature and Humidity Mode, press and hold SET to convert units between degrees
Celsius ºC and degrees Fahrenheit ºF.
Activating/Deactivating the Temperature Alerts
1. In Temperature and Humidity Mode, each press of ALARM rotates channel
temperature display between:
- Current Temperature for corresponding channel
- Upper Temperature Alert (displays OFF if deactivated): [ ] icon displayed
- Lower Temperature Alert (displays OFF if deactivated): [ ] icon displayed
2. When the above alerts are displayed, pressing UP or DOWN will activate/deactivate the
corresponding alert.
Setting up the Temperature Alerts
1. In Temperature and Humidity Mode, press ALARM to select alarm which you wish to
 congure.
2. Press and hold ALARM until channel temperature and [ ] or [ ]iconstartsashingin
the display.
3. Set Value for Temperature Alert:
Press UP or DOWN to adjust value. Press and hold either button for fast advance.
Press ALARMtoconrmyourselection.
4. Upon completion the display will be returned to the temperature alert selection screen.
Disabling when Temperature Alarms are Activated
To Disable Temperature Alarm(s):
Press ALARM to disable the alarm (s).
Viewing the Max/Min Channel Temperature and Humidity
In Temperature and Humidity Mode, each press of MEM or MEMORY rotates channel
temperature and humidity display between:
- Current temperature and humidity at remote sensor
- Minimum temperature and humidity at remote sensor
- Maximum temperature and humidity at remote sensor
Resetting the Max/Min Channel Temperature and Humidity Memory
In Temperature and Humidity Mode, press and hold MEM or MEMORY to clear memory for
all channels.