User manual

20
Setting up the Time Alarms
1. In Clock and Alarm Mode, press ALARMtoselectalarmwhichyouwishtocongure.
2. Press and hold ALARMuntilhourstartsashinginthedisplay
3. Set Alarm Hour:
Press UP or DOWN to adjust value. Press and hold either button for fast advance.
Press ALARMtoconrmyourselection.
4. Set Alarm Minutes:
Press UP or DOWN to adjust value. Press and hold either button for fast advance.
Press ALARMtoconrmyourselection.
5. Set Duration of Snooze Function (all three alarms share same snooze time duration):
Press UP or DOWN to adjust value. Press and hold either button for fast advance.
Press ALARMtoconrmyourselection.
6. Upon completion the display will be returned to the alarm selection screen.
Note: Pre-alarm is only active if one of the alarm has been enabled. The pre-alarm will
activate a set alarm 30 minutes earlier if the temperature of Channel 1 fall at +2°C or below.
Disabling/Entering Snooze when Time Alarms are Activated
To Enter Snooze:
Press LIGHT/SNOOZE to enable snooze function.
Note: Alarm will automatically enter snooze mode if no key is pressed after the alarm
sounds for 2 minutes. This will occur for a maximum of three times.
To Disable Alarm(s):
Press ALARM to disable the alarm (s).
Note: For weekday alarm, pressing ALARM will only disable the alarm for the current day.
The alarm will be activated again the next day (if it falls within Monday to Friday).
Activating/Deactivating Radio Clock Reception
The main console unit synchronizes the time and date with radio clock broadcasts to main-
tain atomic clock precision.
To turn this function on/off:
Press and hold UP.
IfRCreceptionisactivated,atriangulartowericonwillstartashingbesidetheclockicon.
If RC reception is deactivated, the triangular tower icon will disappear.
Icon RC Reception Strength
 Undeneddata
Reception failed for 24 hours
Weak signal, but can be decoded
Strong signal
(Flashing)