User manual

19
Setting up the Time, Date and Language
1. In Clock and Alarm Mode, press and hold SET to enter clock and calendar setup.
2.Thedayofweekshouldstartashinginthedisplay.
Set Language:
Press UP or DOWN to select language for day of week: English, German, French,
Italian, Spanish or Dutch
Press SETtoconrmyourselection.
3. Select City Code:
Press UP or DOWN to select city code for your local area. Refer to P.31 for a list of
available codes.
Press SETtoconrmyourselection.
4. (if USR was chosen for city code) Set Minute for Latitude:
You will be asked to enter your latitude in minutes (º).
Press UP or DOWN to adjust value. Press and hold either button for fast advance.
Press SETtoconrmyourselection.Repeataboveproceduretosetsecondsfor
latitude, minutes for longitude and seconds for longitude.
5. (if USR was chosen for city code) Set Time Zone:
Press UP or DOWN to adjust value in resolution of 30 min. Press and hold either button
for fast advance.
Press SETtoconrmyourselection.
6. (if USR was chosen for city code or city is in a DST zone)
Set Daylight Saving Time Option:
Press UP or DOWN to turn DST option on or off. Press and hold either button for fast advance.
Press SETtoconrmyourselection.
7. Repeat the above instructions to set year, month, day, calendar display format
(day/month or month/day), time display format (12 hr/ 24 hr), local hour and local minutes.
8. Upon completion the display will return to normal Clock and Alarm Mode.
Note: Press and hold SET anytime during the setup to return to normal Clock and Alarm
Mode. All settings made will be discarded.
Rotating between Different Clock/Calendar Displays
In Clock and Alarm Mode, each press of SET rotates clock display between:
- Hour: Minute: Weekday
- Hour: Minute for UTC (Coordinated Universal Time)
- Hour: Minute: City
- Hour: Minute: Second
- Month: Day: Year (or Day: Month Year depending on settings)
Activating/Deactivating the Time Alarms
1. In Clock and Alarm Mode, each press of ALARM rotates clock display between:
- Weekday Alarm Time (displays OFF if weekday alarm deactivated)
- Single Alarm Time (displays OFF if single alarm deactivated)
- Pre-Alarm Time (if any of above alarm is activated, this function is ON)
2. When the above alarms are displayed, pressing UP or DOWN will activate/deactivate
the corresponding alarm.
Note: Press SET anytime during alarm selection mode to return to normal clock display.