User manual

15
Using the Different Weather Modes
Pressure and Weather Forecast Mode
This part of the display indicates the current pressure, sea level pressure, weather
forecast, moon phase and pressure trend.
A number of historical statistics can also be viewed, such as the sea-level pressure values
for the last 24 hours, moon phase for the previous and next 39 days, as well as a pressure/
temperature/ humidity history bar-chart.
Pressure values may be displayed inHg, hPa/mBar or mmHg, and altitude values may be
displayed in meters or feet.
Accessing Pressure and Weather Forecast Mode
From the main console unit: Press UP or DOWN until the weather forecast icon
ontheupperleftofthedisplaystartsashing.
From the remote control: Press .
Setting Pressure Parameters during Initial Start-Up
During the initial start-up of the main console unit, all functions in Pressure and Weather
Forecastmodewillbelockeduntilthepressuresettingsarecongured.
1. Choose Pressure Units:
 Theuniticon“inHg”or“mmHg”or“hPa/mBar”shouldbeashing.PressUP or DOWN to
select pressure unit as inHg, hPa/mBar or mmHg
Press SETtoconrmyourselection.
2. Choose Altitude Units:
Press UP or DOWN to select altitude unit as feet or meters.
Press SETtoconrmyourselection.
3. Set Altitude:
Press UP or DOWN to adjust value. Press and hold either button for fast advance.
Press SETtoconrmyourselection.
4. Upon completion the display will be returned to Pressure and Weather Forecast Mode.
Note: After initial start-up the altitude cannot be adjusted again until the main console unit
is restarted.
Viewing Pressure and Altitude Data
In Pressure and Weather Forecast Mode, each press of SET rotates display between:
- Sea level pressure
- Local pressure
- Local altitude
Setting the Sea Level Pressure
1. In Pressure and Weather Forecast Mode, press SET until the sea level pressure is
displayed.
2. Press and hold SET.TheSeaLevelPressuredisplayshouldbeashing.
3. Set Sea Level Pressure:
Press UP or DOWN to adjust value. Press and hold either button for fast advance.
Press SETtoconrmyourselection.
4. Upon completion the display will be returned to Pressure and Weather Forecast Mode.