manual

Mete-On 38
AA batteries x 2 pcs.
AAA batteries x 2 pcs.
Electromagnetic compatibility and Radio spectrum Matters
ETSI EN 300 220-2 V2.3.1 (2010-02)
ETSI EN 300 330-2 V1.5.1 (2010-02)
Electromagnetic compatibility
ETSI EN 301 489-1 V1.9.2 (2011-09)
ETSI EN 301 489-3 V1.4.1 (2002-08)
Low voltage directive
EN 60950-1:2006+A11:2009+A1:2010+A12:2011
2006/95/EC
ALARM FEATURE
Weekday Alarm:
- This is a repeat alarm that will be activated daily from Monday to Friday at a set time.
Single Alarm:
- This is a single alarm that will be activated once at a set time
HOW TO SET ALARM
- Press [SET] to toggle between weekday alarm, single alarm or pre-alarm.
If the alarm is disarmed, the time will be displayed as “OFF W-ALM”
- Hold [SET] for 3 seconds, the hour digits will be flashing.
- Enter the hour by using UP [▲] or DOWN [▼] button.
- Press [SET] to confirm, the minute digits will be flashing.
- Enter the hour by using UP [▲] or DOWN [▼] button.
- Press [SET] to exit and the respective alarm icons [ ] , [ ] and [ ]will be
activated.
HOW TO STOP ALARM
- When alarm is on, the respective alarm icons [ ] and [ ] will be flashing. Press UP [▲]
or DOWN [▼] button to stop the alarm immediately.
- To turn off the alarm, press UP [▲] or DOWN [▼] button to change the alarm time display
as “OFF W-ALM”
- If no button is pressed, the alarm will be sounded for 2 minutes and then deactivated
automatically.
SETTING THE ICE WARNING ALARM (PRE-ALM)
- If Weekday (W) or Single day (S) alarm is set, the Ice Warning Alarm (Pre-ALM) can be
programmed.
- Press and hold [SET] button for 3 seconds to enter into the Ice Warning Alarm setting mode
“PRE-ALM”.
- The number 15 will be flashing, meaning that if selected, the alarm will be sounded 15
minutes earlier than the Weekday or Single alarm.
- Select the desired Ice Warning Alarm interval in 15 minutes increments between 15 and 90
minutes by using UP (▲) or DOWN (▼) button.
- Press [SET] button to confirm and exit from the alarm setting mode.
71 72