Instruction manual

6 • Putting into operaton
2. PUTTING INTO OPERATION
1. The iClimber is delivered with inserted battery and the watch in a battery
conserving sleep-mode. In this state the display is switched off, “blank”.
2. The watch is activated by pressing any key for at least 3-5 seconds.
3. The watch can now be operated as described in chapter 4.
! Important information
The iClimber is a high quality measuring device with several functions that you
can infl uence and also some that can not be infl uenced because they run in the
background (e.g. pressure measurement). Please be aware that active use of
each additional function requires energy and therewith battery. Often activating
the backlight, using the Key-Tone, the compass for bearings or the peers also
draws power from the battery and this has a direct infl uence on the battery life.
If you are going on an expedition during which you will be intensely using the
watch and exposing yourself and your equipment to very cold temperatures we
strongly recommend taking along replacement batteries (Type CR2032).
The watch battery, if the watch is simply used as a wristwatch, has a lifetime of
up to one year. The repeated use of several functions can reduce the battery
lifetime by a few months!