Instruction manual

Functions and operation • 23
4.3.1 Stopwatch (with LAP and VERTIC-LOG®)
 accumulated time of all LAPs in this
measuring block
 running lap (LAP)
 Display of the pulse (only when the
HEART PEER is available and is on the
display with the heart icon)
In addition, in the SPORT function, the VERTIC-LOG® function is also activated/
deactivated and then started via the stopwatch. If the VERTIC-LOG® is switched on
when climbing in the mountains, every 100 m net altitude ascent the climbing data
is stored in the lap memory. The LAP function via the S/L buttons is switched off.
The operation logic with or without VERTIC-LOG® has only slight differences and is
described separately in the following.
The stopwatch also serves to record the times in the respective zone while the
training zones of the pulse belt and/or the running sensor are being used.