Operation Manual

6- WAKE-UP TIME SETTING (in the display mode AL)
Press and hold the ‘S’ key for approx. 2-3 seconds.
- The flashing hours number of the wake-up time can be set with the upwards ‘▲’ or
downwards ‘▼’ key.
- Press the ‘S’ key briefly: The flashing minutes number can be set with the upwards
‘▲’ or downwards ‘▼’ key.
- Press the ‘S’ key again to confirm the wake-up time set and to exit the setting mode.
With the ‘S’ key, you can then activate or deactivate the alarm.
If the ‘ ’ symbol appears on the display, the alarm is active.
If the symbol does not appear on the display, the alarm is deactivated.
You can also replace the wake-up sound with one of the 8 melodies. Press the upwards
‘▲’ or downwards ‘▼’ key in the AL display to select one of the melodies or also to select
the ‘beep’ wake-up sound again.
When the alarm time has been reached and the alarm clock is activated as described
above, the wake-up call or melody sounds out and the coloured light changes colour to the
rhythm of the melody. The wake-up sounds lasts 60 seconds. It can, however, be
interrupted by touching the display lightly. The wake-up time remains active for the next
day. If you do not want this, the alarm clock needs to be deactivated as described above
with the ‘S’ key.
7- TIMER SETTING (in the display mode TIMER)
Press and hold the ‘S’ key for approx. 2-3 seconds.
- The flashing minutes number can be set with the upwards ‘▲’ or downwards ‘▼’
key. The maximum timer time that can be set is 180 minutes and 59 seconds. The
minimum is just 1 second exactly).
- Press the ‘S’ key briefly. The flashing seconds number can be set with the upwards
‘▲’ or downwards ‘▼’ key.
- Press the ‘S’ key again to confirm the setting and to exit the setting mode.
To start the timer which has been set in this way, press the ‘S’ key briefly. The time then
begins to count backwards and the symbol ‘TIMER’ flashes. (If you change the display
mode when the timer is running, you will continue to see the flashing 'TIMER' in the
display).
If you press the ‘S’ key again, the timer will stop. The ‘TIMER’ symbol then stops flashing.
In order to allow the timer to continue running, press the ‘S’ key again.
When the timer is stopped, you can also move back to the time set with the upwards key
‘▲’ or with the downwards key to zero.
When the time has expired, the alarm sound ‘beep’ sounds out for 60 seconds and the
display flashes in different colours. A melody cannot be selected in this function.
The alarm sound can be interrupted at any time using the rocker-switch contact of the
display. If this is not done, the alarm sound can be interrupted when the 60 seconds have
expired and the prior timer time appears, ready for a restart, on the display.
8- DISPLAY MODE OF THE TEMPERATURE (in the display mode TEMPERATURE)
Press the ‘S’ key to change the temperature unit from °C to °F and vice versa.