FLIP 99 Operating Instructions
Table of contents 1- DEVICE FUNCTIONS 2- PUTTING INTO OPERATION 3- OPERATION 4- TIME SETTING 5- DATE SETTING 6- WAKE-UP TIME SETTING 7- TIMER SETTING 8- DISPLAY MODE OF THE TEMPERATURE 9- MELODY SELECTION 10- CARE INSTRUCTIONS 11- SUPPORT x x x x x x x x x x x
1- DEVICE FUNCTIONS • ALTERNATING DISPLAY OF TIME (12- or 24-HOURFORMAT), TEMPERATURE (°C OR °F) AND DATE (YEAR 2000-2099) • WAKE-UP TIME • COUNTDOWN TIMER (MAX.
3. Switch ‘Return to time’ on the underside ON: If no manipulation to the device is made after selection of a display mode with the rocker-switch contact, the display automatically changes back to the time display. OFF: The display always stays in the last mode displayed. 4. Keys on the underside M – same function as the display rocker-switch contact S – pressed briefly: To change the display in the corresponding display mode or to activate a function – pressed for a long time (approx.
6- WAKE-UP TIME SETTING (in the display mode AL) Press and hold the ‘S’ key for approx. 2-3 seconds. - The flashing hours number of the wake-up time can be set with the upwards ‘▲’ or downwards ‘▼’ key. - Press the ‘S’ key briefly: The flashing minutes number can be set with the upwards ‘▲’ or downwards ‘▼’ key. - Press the ‘S’ key again to confirm the wake-up time set and to exit the setting mode. With the ‘S’ key, you can then activate or deactivate the alarm.
9- MELODY SELECTION (in each display mode apart from TIMER) In the time mode, press the upwards ‘▲’ or downwards ‘▼’ key to select one of the 8 melodies. The last played melody is then adopted for the wake-up sound. If you do not wish this, go into the AL mode and select the '9th melody' as described here: the simple ‘BEEP’ tone. 10- CARE INSTRUCTIONS - Do not expose the device to extreme temperatures or direct sunlight over longer periods. - Avoid blows and shocks of any kind to the device.
