Instruction manual

ENG

9. The “ON” digits will ash. Press [ ] or [ ] button to switch between ON

and OFF. Press [CLOCK] button to conrm and exit setting mode.

Note: If no key press during setting mode for 10 seconds, it will

automatically keep the setting and exit to normal display.

To set daily alarm

1. In clock time display mode, press the [CLOCK] button to switch to display

the alarm time. The alarm icon will ash.

2. Press and hold [CLOCK] button for 2 seconds to enter alarm setting

mode.

3. The hour digits will ash, use [ ] button to increase by one hour or [ ]

button to decease by one hour to your desired hours. Holding down the

button will change the increment unit rapidly. Press [CLOCK] button to

conrm.

4. The minute digits will ash. Use [ ] button to increase by one minute or

[ ] button to decease by one minute to your desired minutes. Holding

down the button will change the increment unit rapidly. Press [CLOCK]

button to conrm and nish the setting.

CRYSTAL WEATHER ICON ILLUMINATION CYCLE

1. Press and hold [UNIT] for 2 seconds, the digits of the illumination cycle

for the crystal weather icon start to ash.

2. Press and hold [ ] or [ ] button to select the duration: 5 minutes, 10

minutes, 20 minutes, 30 minutes and 60 minutes.

3. Press [UNIT] button to conrm and nish the setting. Longer illumination

cycle will save more battery power and have a longer battery lifetime.