Instruction manual

Note:
- Every change of minute digit will automatically reset the seconds to zero.
6. Theword“On”willnowappearandashontheclocktimeplace.Thismeansthat
theDCFreceptionisturnedon.Press[▲]or[▼]totoggleDCFreceptiontoOFF
orON.Press[MENU/SETUP]toconrm.
Note:
- When DCF reception is turned ON, the time will be updated once the time
signal is received
- Once DCF reception is set to OFF or the time is set manually, the RCC time
indicator icon will disappear
- If no key press during setting mode for 10 seconds, it will automatically save
the setting value and exit to normal display.
TO SET DAILY ALARM
1. Inclocktimedisplaymode,press[
]buttononcetoswitchtodisplayalarmtime
for 10 seconds.
2. Press[
]buttonagaininalarmdisplaymodetoenableordisablethedailyalarm.
3. Inalarmtimedisplaymode,pressandhold[
]buttonfor2secondstoenter
alarm setting mode.
4. Thehourdigitswillash,use[▲]buttontoincreasebyonehouror[▼]buttonto
decrease by one hour to your desired hours. Holding down the button will change
theincrement/decrementunitrapidly.Press[
]buttontoconrm.
5. Theminutedigitswillash.Use[▲]buttontoincreasebyoneminuteor[▼]but-
ton to decrease by one minute to your desired minutes. Holding down the button
willchangetheincrement/decrementunitrapidly.Press[
]buttontoconrmand
nishthesetting.Theunitwillshowthealarmtimefor10secondsandauto-exit
toclocktimedisplay.Thealarmbellicon[
]willappearinclocktimedisplayto
indicate the daily alarm is enabled.
TO ACITVATE THE SNOOZE FUNCTION
Inthetopmiddleoftheweatherstation,thereisanIRmotionsensorwhichcanacti-
vatesnoozefunction.Whenthealarmsounds,moveyourhandabovetheIRmotion
sensor within the distance of 15cm to pause alarm and activate snooze function. The
alarmbellicon[
]willkeepashingduring5minutesnoozetime.Pressanykeyto
exit snooze.
~27~
(ENG)