Instruction manual

DESCRIPTION OF BUTTONS
The weather station has 8 major buttons on the rear side:
1. [
] Button
- Pressoncetoswitchfromclockmodetoalarmtimedisplaymode
- While in alarm display, press once to make the alarm icon appear to enable the
daily alarm
- Pressonemoretimetoletalarmicondisappeartodisablethedailyalarm
- Whileinalarmdisplaymode,pressandholdAlarmbuttonfor2secondstoenter
alarm setting mode
2. [MAX/MIN] Button
- ToggletoviewtheMax/MinreadingoftheIndoorandRemoteTemperature.
3. [MENU/SETUP] Button
 Pressandholdfor2secondstoenterclocksettingmode
4. [CH] Button
- Presstoselectfromchannels(1,2or3)orenterintoscrollmode
- Pressandholdfor2secondstoactivateordeactivatethesensorsearchingmode
5. [▲]Button
 PressoncetoincreasethesettinginCLOCKorALARMsettingmode
6. [▼]Button
 PressoncetodecreasethesettinginCLOCKorALARMsettingmode
7. [RESET] Button
 Pressoncetotriggersystemresetandrestoreallsettingstofactorydefault
8. [BRIGHT/DIM] Button
Toggle to select bight LED display or a dim LED display
GETTING STARTED
This Weather Station is designed for easy set up. For best operation, the following
steps are required to be done in the proper sequence.
 1. Insertbatteriesrsttothemainunit
 2. Insertbatteriestothesensorunit
3. Immediately thereafter
connect the main unit to the power adapter
Note:
- The main unit cannot be programmed manually until the wireless remote sensor
unit registration procedure has been completed.
- Position the remote unit and main unit within the same room in a distance of about
1-2 meters.
- Although the remote unit is weather resistant, it should be placed away from direct
sunlight, rain or snow.
~23~
(ENG)