Instruction manual

ManualsBrandsIrox ManualsDomestic AppliancesEBR505

(ENG)

-1-

EBR505

INSTRUCTION MANUAL

FUNCTIONS OF THE WEATHER STATION

This weather station measures the environment of its surrounding area and may receive the measured temperature and relative

humidity of up to three (868MHz) remote thermo/hygrometers. The information is displayed by LCD.

FEATURES

• Weather forecast based on barometric pressure changes

• Radio controlled time (DCF77)

• Displays indoor/outdoor minimum and maximum temperature/humidity

• Low battery indication for main unit and wireless sensors

• Two Daily alarms (wake-up alarm) with SNOOZE function

• 12 or 24 hour time format

• Moon Phase

• LCD Backlight

• Wall mount or free standing

Summary of content (8 pages)

PAGE 1
(ENG) EBR505 INSTRUCTION MANUAL FUNCTIONS OF THE WEATHER STATION This weather station measures the environment of its surrounding area and may receive the measured temperature and relative humidity of up to three (868MHz) remote thermo/hygrometers. The information is displayed by LCD.
PAGE 2
(ENG) DISPLAY AND FUNCTIONS ON THE MAIN UNIT A. Air pressure trend arrows Indicates the trend of air pressure changes. B. Low battery indicator of outdoor sensor Appears when the batteries of the remote sensor are running dry and the temperature measured by this sensor is no longer reliable. The user must change the batteries at once. C. Weather forecast window Shows weather forecast by using icons. D. Moon phase Shows current moon phase. E.
PAGE 3
(ENG) DESCRIPTION OF BUTTONS The EBR505 has 6 function buttons on the front. 1. SNOOZE/LIGHT Button Press once to activate the LCD backlight for 5 seconds or SNOOZE function. 2. ▼/UNIT Button Press once to decrease the setting in clock, calendar or alarm setting mode. While in clock display mode, press once to toggle between ˚C and ˚F 3. ▲/CH Button Press once to increase the setting in clock, calendar or alarm setting mode. Select among channel 1, 2, 3 or to enter auto scroll mode.
PAGE 4
(ENG) BATTERY INSTALLATION FOR MAIN UNIT 1. Remove the battery door. 2. Insert 3 pieces of AA size 1.5V alkaline battery as indicate by the polarity. 3. Close the battery door. Note: Replace the batteries when the low battery indicator appears on the bottom-left corner of the LCD. BATTERY INSTALLATION FOR REMOTE SENSOR UNIT 1. Remove the battery cover by grabbing its bottom edge (near the two recess location) from bottom of sensor unit. 2.
PAGE 5
(ENG) WIRELESS REMOTE SENSOR REGISTRATION PROCEDURE 1. Insert 3 pieces of AA batteries first to the main unit. The temperature display shows - - - - while the wave icon will keep blinking for 2 minutes indicate the main unit is in sensor searching mode. 2. In a second step, insert the 2 pieces of AA batteries into the sensor unit. The red LED on the front will start flashing at a rate of one time per 2 seconds indicates channel-1 is in use. 3.
PAGE 6
(ENG) SET THE CLOCK, CALENDAR & LANGUAGE 1. Press & hold MODE/ENTER button for 2 seconds to enter clock setting mode. Flashing 12/24 hours will appear. 2. Press▼/UNIT button or▲/CH button to switch between 24 hours and 12 hours format, and then press MODE/ENTER button to confirm. 3. The hour digits will flash. Use the▼/UNIT button to decrease by one hour or▲/CH button to increase by one hour to your desired hour. Hold press either button will change the digit rapidly. Press MODE/ENTER button to confirm. 4.
PAGE 7
(ENG) TO SET DAILY ALARM 1. In clock time display mode, press MODE/ENTER button to select alarm 1 or 2, then hold and press MODE/ENTER again for 2 seconds to access alarm setting. 2. The hour digits will flash use▼/UNIT button to decrease by one hour or ▲/CH button to increase by one hour to your desired hour. Hold press either button will change the digit rapidly. Press MODE/ENTER button to confirm, alarm enable automatically when▼/UNIT button or▲/CH button pressed. 3. The minute digits will flash.
PAGE 8
(ENG) SPECIFICATIONS Main Unit Proposed operating range and measuring range Temperature resolution : 0.0°C to +50.0°C (32.0°F to 122.0°F) : 0.1°C (0.2°F) Displayed OUT temperature range Temperature resolution : -10.0°C to +60.0°C (-14.0°F to 140.0°F) : 0.1°C (0.2°F) Indoor/Remote relative humidity measurement Displayed relative humidity range Batteries : 20%RH to 99%RH : 3 pieces of AA size 1.