Operation Manual

2. Start-up and set-Up
Setting-uptheCUBO-Tiseasy.Justfollowthestepsbelow:
1)Activatethebatteries.Afterinsertingthebatteries,afullsegmentdisplayisshownforafewsecondsandabeepsoundisheard.
2)Afterthis,theCUBO-TwillstarttoreceivethetimefromthetimesignaltransmitterDCF77.ThismaytakeafewminutesWaituntilthetimeisindicatedcorrectlyon
the device.
3)Nowyoumayset-uptheCUBO-Tbyfollowingbelowsteps.
(ENG)
- 28 -