Operation Manual

1. LCD (display) and keys
FULLSEGMENTDISPLAY
- Afterinsertingthebatteries,thefullsegmentdisplayisshownforafewsecondsandashortbeepsoundisheard.
MODEkey
- to change the time display (with running seconds or day of the week).
- Pressandhold3secstoentersettingmode.
ALARMkey
- to select the ALARM1, ALARM 2 or DATE display.
- Pressandhold3secstoenterthealarmsettingmode.
▲/▼keys
- Insettingmodes,thesekeysareusedtoadjustthevalue.Toquicklychangeavalueinthesetting,pressandhold▲or▼.
- In ALARM 1 or ALARM 2 dispaly: Activate/deactivate the corresponding alarm.
- InDATEdisplayandifRCreceptionisON:Pressandhold▲3secstostartmanuallyanewRCtimereception.Ashortpressof▲willstopitagain.
LIGHT/SNOOZEkey
- Backlight:Presskeytoactivatethebacklightfor8secson.Ifanykeyispressedwithinthese8secs,thenthebacklightstayson.
- WhenALARMactive:Presstoactivatethe8minuteSNOOZEcycle.
BATTERYCOMPARTMENT
Isdesignedfor2batteries,sizeAAA.Pleaseobservepolaritywheninsertingbatteries.
Important Note:
While a RC reception is active (
tower blinking), you may not enter any setting with the MODE or ALARM key. If you wish to do so, stop the RC reception by
pressing short ▲ or wait until the reception stops automatically.
-27-
(ENG)