Wireless Driveway Alert Owner’s Manual WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result in serious personal injury.
Thank you very much for choosing an Ironton™ product! For future reference, please complete the owner’s record below: Serial Number/Lot Date Code: ________________________________ Purchase Date: ____________________________________________ Save the receipt, warranty, and this manual. It is important that you read the entire manual to become familiar with this product before you begin using it. This wireless driveway alert is designed for certain applications only.
Table of Contents Intended Use .......................................................................................................................................... 4 Packaging Contents .............................................................................................................................. 4 Technical Specifications ...................................................................................................................... 4 Important Safety Information .................
Intended Use The Ironton wireless driveway alert system gives you protection and peace of mind by notifying you audibly as soon as anyone enters your driveway. This system operates conveniently on batteries, so no electricity is required to install it. It includes an outdoor motion sensor and an indoor alarm. When motion is detected, the indoor receiver sounds an alert.
⚠WARNING WORK AREA SAFETY Inspect the work area before each use. Keep work area clean, dry, free of clutter, and well-lit. Cluttered, wet, or dark work areas can result in injury. Using the product in confined work areas may put you dangerously close to cutting tools and rotating parts. Do not use the product where there is a risk of causing a fire or an explosion; e.g., in the presence of flammable liquids, gases, or dust.
capacities together. Verify that the installation surface has no hidden utility lines before drilling or driving screws. Do not install the receiver in a location that will get wet or directly exposed to the elements. The receiver is not intended to be weather-resistant.
Check for loose hardware. Operating Instructions 1. The power switch has three settings: OFF: Power is off. HI: A loud beep (92dB) and the LED will flash when motion is detected. LOW: A short beep (80dB) and the LED will flash when motion is detected. 2. Slide the power switch on the receiver to the HI setting. Allow 30 seconds for a warm-up. Two short beeps will sound, indicating the alarm is working. 3.
Parts Diagram Parts List Part Description Sensor Receiver Hardware (not shown) Quantity 1 1 1 (bag) Replacement Parts For replacement parts and technical questions, please call Customer Service at 1-800-222-5381. Not all product components are available for replacement. The illustrations provided are a convenient reference to the location and position of parts in the assembly sequence.
Limited Warranty Northern Tool and Equipment Company, Inc. ("We'' or ''Us'') warrants to the original purchaser only (''You'' or ''Your'') that the Ironton product purchased will be free from material defects in both materials and workmanship, normal wear and tear excepted, for a period of one year from date of purchase. The foregoing warranty is valid only if the installation and use of the product is strictly in accordance with product instructions.
Distributed by: Northern Tool & Equipment Company, Inc. Burnsville, Minnesota 55306 www.northerntool.
