Product Manual

Page 7 of 14
• Inspect lens before each use. Pitted or scratched lens plates reduce vision clarity, severely reduce
impact protection and should be replaced immediately to prevent injury.
• Not for use with laser welding processes.
• Inspect the helmet before each use. Do not use if damaged. Replace worn parts before using.
• Not for use by children. Store helmet out of the reach of children.
⚠WARNING
This product uses non-replaceable lithium batteries. To help avoid fluid leaks or explosions please
adhere to the following warning:
• Do not attempt to replace the batteries.
• Ensure you properly dispose of this product.
• Disposal should be in accordance with national and local regulations.
• Dispose of batteries safely. Do not dispose of this product in a fire. The batteries inside may
explode.
• Do not expose to excessive heat.
Before Each Use
⚠WARNING
• Before welding or cutting, ensure the darkness range of this helmet offers enough eye protection
for your use.
• Inspect lens before each use. Pitted or scratched lens plates reduce vision clarity, severely reduce
impact protection and should be replaced immediately to prevent injury.
• Inspect the helmet before each use. Do not use if damaged. Replace worn parts before using.
• If the Auto Darkening Filter (ADF) does not darken when the arc is struck, immediately stop
welding and consult the manual (ADF only).
• Do not use this helmet while working or around explosives or corrosive liquids.
• Do not weld on the overhead position while using this helmet.
Operating Instructions
⚠WARNING
• Before welding or cutting, ensure the darkness range of this helmet offers enough eye protection
for your use.