Product Manual

Page 4 of 14
Intended Use
The Ironton Auto-Darkening Welding Helmet is ideal for most welding applications and designed to
meet the most demanding welding jobs.
• Solar-powered auto-darkening lens
• Independent arc sensors
• 9-13 variable shade and UV/IR protection DIN16 auto-darkening lens with external controls
• Adjustable ratcheting headgear with replaceable sweatband
• Grind mode
Packaging Contents
• Welding Helmet
• Owner’s Manual
Technical Specifications
Property
Specification
Viewing Area
3.62x1.65in. (92x42mm)
Cartridge Size
4.33x3.54x0.35in. (110x90x9mm)
Light State Shade
DIN4
Dark State Shade
DIN9-13
Shade Control
External Control
Power On/Off
Fully Automatic
Sensitivity Control
Fixed
UV/IR Protection
Up to Shade DIN16 at all times
Power Supply
Solar cells and non-replaceable battery
Low Battery Warning
No
Switching Time
0.2ms
Delay (Dark to Light)
0.5s
Low Amperage TIG Rated
>2 amps DC, >2 amps AC
Grinding
Yes
Operating Temperature
14° F- + 131° F (-10° C - + 55° C)
Storing Temperature
-4° F - + 158° F (-20° C - + 70° C)
Helmet Material
PA
Total Weight
1.08 lb. (0.49 kg.)
Application Range
MIG.TIG.ARC.MAG Welding
Tested
ANSI Z87.1
Important Safety Information
⚠WARNING
• Read and understand all instructions. Failure to follow all instructions may result in serious injury
or property damage.
• The warnings, cautions, and instructions in this manual cannot cover all possible conditions or
situations that could occur. Exercise common sense and caution when using this tool. Always be