Product Manual

Page 6 of 10
others.
 Do not exceed the load capacity of the dolly frame. Always block the wheels when loading or
unloading.
 Do not move the dolly frame while the machine has power or is plugged in.
 All dolly frame casters should be locked while the machine is being used.
 Use the dolly frame on flat and level surfaces capable of supporting the maximum load capacity.
Pulling or pushing a load on a slanted or uneven surface can result in a loss of control.
Assembly Instructions
 Pull out the spring-loaded knob (A) and slide the side adjusting plate (B) into the castor bracket
assembly (C).
 Insert the spring-loaded pin into one of the indexing holes found in the side adjusting plate.
 Lock the four castors by stepping on the brake pedals (D). Unlock by flipping the pedal up with
your foot.
 Position the machine so that it rests evenly on the castor brackets (see figure on following page).
Operating Instructions
After assembling the base, pull out the spring-loaded knob, adjusting the side plate to a suitable size
for moving the machine. Next, lock the caster and place the machine on the base for use.
Note: When using the machine, unlock the caster.