82-LED Solar-Powered Motion Security Light Owner’s Manual WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result in serious personal injury.
Thank you very much for choosing an Ironton™ product! For future reference, please complete the owner’s record below: Serial Number/Lot Date Code: ________________________________ Purchase Date: ____________________________________________ Save the receipt, warranty, and this manual. It is important that you read the entire manual to become familiar with this product before you begin using it. This solar-powered light is designed for certain applications only.
Table of Contents Intended Use .......................................................................................................................................... 4 Technical Specifications ...................................................................................................................... 4 Important Safety Information ............................................................................................................... 4 Assembly Instructions .............................
Intended Use The Ironton 182-LED Solar-Powered Motion Security Light delivers 1000 lumens of brilliant illumination and flexibility. This easy-to-install light requires no electricity and features three adjustable heads, allowing customized illumination to cover one area or multiple areas at the same time. Motion activation automatically triggers the light when movement is detected within 40 feet.
Be aware of all power lines, electrical circuits, water pipes, and other mechanical hazards in your work area. Some of these hazards may be hidden from your view and may cause personal injury and/or property damage if contacted. ⚠WARNING PERSONAL SAFETY Stay alert, watch what you are doing, and use common sense when operating the tool. Do not use the tool while you are tired or under the influence of drugs, alcohol, or medication.
Make sure this is clear of obstacles such as cables and electric lines. Secure lamp to the wall with screws provided. Carefully route the wire from the solar panel to the lamp and plug it into the battery housing input. Adjust the motion sensor so that it faces the area where motion detection is desired. You can move it up and down by adjusting the screw on the neck of the motion detector. Note: The lamp unit should be mounted 6.
A regular visual inspection is recommended. Ensure the solar panel is free from debris and in a location where it will receive several hours of sunlight each day. Ensure the light is facing the desired direction and that there are no nearby alternate light sources that may interfere with the motion sensor. Operating Instructions 1. Before the light can operate at full capacity, allow the unit to charge in sunlight for 3 days with the solar panel wire connected to the light.
Maintenance Maintain the light by adopting a program of conscientious repair and maintenance in accordance with the following recommended procedures Maintenance Interval Maintenance Point Allow the solar panel to charge the light for two sunny days. First Use Observe the solar panel once installed for one day. Ensure that it is not shaded at any time during daylight. Observe the light once installed during the evening.
Failure Possible Cause Switch is in the wrong position. Corrective Action Move the switch to the AUTO position. Replace the batteries with new rechargeable batteries of the same type and size. Battery Replacement Rechargeable batteries are at the end of their life. 1. 2. 3. 4. Sensor is malfunctioning. Batteries are not fully charged. Light does not stay on as long as it previously did or it flashes. Batteries are located in the battery housing located at the back of the lamp.
Parts Diagram Parts List Reference 1 2 3 4 5 Part Description Light Solar Panel Mounting Screws (pack) Mounting Brackets Manual Quantity 1 1 1 1 1 Replacement Parts For replacement parts and technical questions, please call Customer Service at 1-800-222-5381. Not all product components are available for replacement. The illustrations provided are a convenient reference to the location and position of parts in the assembly sequence.
Limited Warranty Northern Tool and Equipment Company, Inc. ("We'' or "Us'') warrants to the original purchaser only ("You'' or “Your”) that the Ironton product purchased will be free from material defects in both materials and workmanship, normal wear and tear excepted, for a period of 90 days from date of purchase. The foregoing warranty is valid only if the installation and use of the product is strictly in accordance with product instructions.
Distributed by: Northern Tool & Equipment Company, Inc. Burnsville, Minnesota 55306 www.northerntool.
