Product Manual

Page 10 of 15
 Loose hardware,
 Damaged cord/electrical wiring,
 Cracked or broken parts, and
 Any other condition that may affect its safe operation.
Operating Instructions
⚠WARNING
 Electrical Shock and Fire Hazard. Do not exceed the marked lamp holder wattage or string
maximum wattage including any additional string loads.
 Do not plug in an additional light or appliance that exceeds 1125 watts.
 Electric shock hazard. Do not use with an extension cord near water or where water may
accumulate. Do not use in wet or damp areas.
 Electric shock hazard. Do not use while standing on wet or damp areas.
 Keep lamp at least 16 feet (5m) from pools and spas.
 Keep plugs and receptacles dry. For use only on GFCI protected circuits in accordance with article
590 of the NEC.
 Do not submerge the light in water. The light is not waterproof. Use extreme caution in any wet
location.
 Risk of fire. Keep away from combustibles. Do not leave the light unattended when it is plugged
into an electrical outlet. Turn off the light, and unplug it from its electrical outlet before leaving.
 Do not use in the proximity of vehicles or equipment, when there are flammable liquids present.
 Burn Hazard. Do not touch hot surfaces.
 Unplug and allow to cool before replacing bulb. Bulb gets HOT quickly! Only contact On/Off
Button/Plug when turning on. Do not touch hot lens, guard, or enclosure. Do not remain close to
the light if skin feels warm. Do not look directly at lighted lamp.
 Do not operate without guard.
 Do not touch the bulb at any time. Use a soft cloth. Oil from your skin may damage the bulb.
 People with pacemakers should consult their physician(s) before use. Electromagnetic fields in
close proximity to heart pacemaker could cause pacemaker interference or pacemaker failure. In
addition, people with pacemakers should:
 Avoid operating alone.
 Properly maintain and inspect to avoid electrical shock.
 Properly ground the power cord. Ground Fault Circuit Interrupter (GFCI) should also be
implemented – it prevents sustained electrical shock.
Replacing the Light Bulb
 First unlock the button on the lamp guard and remove the broken light bulb.