Product Manual

Page 9 of 17
Subassembly
Collet
Shaft Collar
Spindle Lock
Accessible Brushes
Variable Speed Dial
Hanging Ring
ON/OFF Switch
Hanging Stand
LED Light
Hanging Stand Base
Guard
Flexible Shaft
Before Each Use
⚠WARNING
 Always remove the plug from the power source before installing.
 Verify the chuck is tight.
 Make sure workpiece is properly secured.
 Always check for damaged or worn out parts before using the rotary tool. Broken parts will affect
the rotary tool operation. Replace or repair damaged or worn parts immediately.
Operating Instructions
⚠WARNING
 To reduce the risk of injury, user must read this manual.
 To reduce the risk of injury, always wear eye protection.
 To reduce the risk of injury, use only accessories rated at least equal to the maximum speed