Product Manual

Page 12 of 17
2. Loosen the collet nut (1) fully using the 2-in-1 wrench provided.
3. Select a suitable collet for the accessory to be used and insert it in the collet nut shaft. Then
tighten the nut.
After Each Use
⚠WARNING
 Store the rotary tool in a dry and clean place.
 Keep the tool away from children.
Maintenance
⚠WARNING
 Keep the ventilation vents of the tool clean at all times, if possible, prevent foreign matter from
entering the vents.
 Handle accessories carefully to prevent dropping or bumping. Do not use wheels that have been
dropped or bumped.
 Store accessories in the carrying case. Store in a dry area and at above freezing temperature. Any
grinding or cut-off wheels exposed to humidity or freezing temperatures must not be used. Keep
all accessories out of the reach of children.