Product Manual

Page 10 of 17
marked on the tool.
 To reduce the risk of injury, always use proper guards when grinding.
 Hold power tools by insulated gripping surfaces, when performing an operation where the cutting
tool may contact hidden wiring or its own cord.
 Do not modify the tool in any way. Unauthorized modification may impair the function and/or safety
and could affect the life of the equipment. Never change the position of the forward/reverse switch
while the chuck is turning.
 Do not use the accessories in this kit on other rotary tools with a maximum rated no load speed
more than 35,000 RPM.
 Never bend the flexible shaft any smaller than 5 in. in diameter. Bending the flexible shaft any
tighter than 5 in. will cause the inner shaft to bind, causing additional load on your tool.
 Placing excessive load on the rotary tool while it is running at low speeds may cause it to overheat
and the motor to fail.
Varying the Speed
The speed of the rotary tool can be regulated by adjusting the variable speed dial. For the lowest
speed, adjust the dial to the number 1, for full speed, adjust the dial to MAX 6.