31-Piece Rotary Tool Kit Owner’s Manual WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result in serious personal injury.
® Thank you very much for choosing an Ironton product! For future reference, please complete the owner’s record below: Serial Number/Lot Date Code: ________________________________ Purchase Date: ____________________________________________ Save the receipt, warranty, and this manual. It is important that you read the entire manual to become familiar with this product before you begin using it. This tool kit is designed for certain applications only.
Table of Contents Intended Use .......................................................................................................................................... 4 Packaging Contents .............................................................................................................................. 4 Technical Specifications ...................................................................................................................... 4 Important Safety Information .................
Intended Use The Ironton 131-Piece Rotary Tool Kit features a 160 Watt variable speed rotary tool that operates at 8000-35,000 RPM for powerful performance. It accepts standard rotary tool accessories to cut, saw, grind, drill, polish, sharpen, and more. Include a complete collection of sanding pads, wire brushes, felt wheels, grinding stones, and drilling accessories to tackle a wide variety of household and shop projects.
⚠WARNING WORK AREA SAFETY Inspect the work area before each use. Keep work area clean, dry, free of clutter, and well-lit. Cluttered, wet, or dark work areas can result in injury. Using the product in confined work areas may put you dangerously close to cutting tools and rotating parts. Do not use the product where there is a risk of causing a fire or an explosion; e.g., in the presence of flammable liquids, gases, or dust.
Check for damaged parts before each use. Carefully check that the product will operate properly and perform its intended function. Replace damaged or worn parts immediately. Never operate the product with a damaged part. Do not use a product with a malfunctioning switch. Any power tool that cannot be controlled with the power switch is dangerous and must be repaired by an authorized service representative before using.
CHECK with a qualified electrician or service person if you do not completely understand the grounding instructions, or if you are not sure the tool is properly grounded. Grounded Tools: Tools with 3-Prong Plugs Tools marked with Grounding Required have a 3-wire cord and 3-prong grounding plug. The plug must be connected to a properly grounded outlet.
extension cord or have it repaired by a qualified person before using it. Protect your extension cords from sharp objects, excessive heat and damp or wet areas. Grounded tools require a 3-wire extension cord. Double Insulated tools can use either a 2- or 3wire extension cord. As the distance from the supply outlet increases, you must use a heavier gauge extension cord.
Subassembly Collet Shaft Collar Spindle Lock Accessible Brushes Variable Speed Dial Hanging Ring ON/OFF Switch Hanging Stand LED Light Hanging Stand Base Guard Flexible Shaft Before Each Use ⚠WARNING Always remove the plug from the power source before installing. Verify the chuck is tight. Make sure workpiece is properly secured. Always check for damaged or worn out parts before using the rotary tool. Broken parts will affect the rotary tool operation.
marked on the tool. To reduce the risk of injury, always use proper guards when grinding. Hold power tools by insulated gripping surfaces, when performing an operation where the cutting tool may contact hidden wiring or its own cord. Do not modify the tool in any way. Unauthorized modification may impair the function and/or safety and could affect the life of the equipment. Never change the position of the forward/reverse switch while the chuck is turning.
Holding the Tool 1. For small milling cutters/grinders pencils, use high speed For jobs such as milling or engraving where precision is required, hold the mini-drill like a pen. 2. For large milling cutters/grinders pencils, use low speed. For heavier work, like cutting or grinding, hold the machine in the palm of your hand. Changing Accessories 1. Press and hold down the spindle lock button (4) and unscrew the collet nut (1).
2. Loosen the collet nut (1) fully using the 2-in-1 wrench provided. 3. Select a suitable collet for the accessory to be used and insert it in the collet nut shaft. Then tighten the nut. After Each Use ⚠WARNING Store the rotary tool in a dry and clean place. Keep the tool away from children. Maintenance ⚠WARNING Keep the ventilation vents of the tool clean at all times, if possible, prevent foreign matter from entering the vents. Handle accessories carefully to prevent dropping or bumping.
Maintain the rotary tool by adopting a program of conscientious repair and maintenance in accordance with the following recommended procedures. It is recommended that the general condition of any tool be examined before it is used. Keep your tool in good repair. Keep handles dry, clean, and free from oil and grease. The following chart is based on a normal operation schedule. Maintenance Interval Daily before operating Maintenance Point Blow dust and grit out of the motor vents using dry compressed air.
Parts Diagram Parts List Reference 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 Part Description Collet nut Collet Nose cap Spindle lock Ø8 Base (cu) Bearing Fan Rotor Right housing Brush Screw Speed control Stator Speed control Switch Hanger Cord sleeve Plug Cord Left housing Page 14 of 17 Quantity 1 1 1 1 1 2 1 1 1 2 6 1 1 4 1 1 1 1 1 1
Replacement Parts For replacement parts and technical questions, please call Customer Service at 1-800-222-5381. Not all product components are available for replacement. The illustrations provided are a convenient reference to the location and position of parts in the assembly sequence. When ordering parts, the following information will be required: item description, item model number, item serial number/item lot date code, and the replacement part reference number.
Limited Warranty Northern Tool and Equipment Company, Inc. ("We'' or ''Us'') warrants to the original purchaser only (''You'' or ''Your'') that the Ironton product purchased will be free from material defects in both materials and workmanship, normal wear and tear excepted, for a period of one year from date of purchase. The foregoing warranty is valid only if the installation and use of the product is strictly in accordance with product instructions.
Distributed by: Northern Tool & Equipment Company, Inc. Burnsville, Minnesota 55306 www.northerntool.
